FLY-ALPS Firmware Update

Applicable Version

This document applies to devices with firmware version >= v2.0.0. This version can be updated directly through the web tool without entering DFU mode. If your firmware version is lower than this, please refer to the Firmware Flashing documentation.

Check Firmware Version

Through the Web Tool, you can view the current firmware version after connecting the device.

Firmware Download

Please download the correct firmware for updating via the web tool:

• APLS-V2.1.1.bin

Windows 默认可能隐藏文件扩展名。下载后请确认文件扩展名未被修改，不要保存成 .txt 或其他扩展名。

The current firmware is located in the firmware repository at the following path:

FLY-Firmware/ExtensionBoard/ALPS/Product-Firmware

Update Steps

1. Connect the device to your computer using a Type-C cable that supports data transfer.
2. Visit FLY-ALPS Configuration Tool, click Connect Device and select the ALPS serial port in the popup window.
3. After successful connection, click the Enter Flashing button, and the device will automatically enter flashing mode and display the flashing dialog.
4. Click Select Device, choose FLY-ALPS from the popup list, then click Connect.
5. Click Select Firmware, browse and select the downloaded firmware file.
6. Click Start Flashing, and wait for the flashing process to complete.
7. The device will automatically restart after flashing is successful.

Note

Do not disconnect the Type-C connection during the update process, as this may cause the flashing to fail.