install

Installation Guide

Installation on Voron Stealthburner

• Installing Halo on Stealthburner requires the adapter provided by us
• First, download and print the model we provide
  • Click the download link below
• Loading...

Antenna Installation

Loading...

Loading...

FPC Installation

• Install the FPC cable as shown in the image above (Do not reverse the direction of the FPC cable; the blue side should face up)

Loading...

Loading...

Fixed Bracket Installation

Loading...

Loading...

Loading...

Loading...

Pass the FPC through the cable hole as shown in the image above

Loading...

Loading...

As shown in Figure 1 above, first align the bottom buckle, then press the top part in. Figure 2 shows the installed result

Loading...

Loading...

Install the Adapter Board and Jumper Cables

• The cable routing can be based on your preference; it does not have to be attached to the back of the fan

Loading...

Notes

• Cable color description: Black is negative GND, Red is positive VCC, accepting DC12-24V, White is GPIO47, can be used for filament detection, Yellow is GPIO48, can be used for print-completed shutdown

Installation on Filament Detection

• Pending update