TP 5V External Driver
The TP 5V External Driver is a new category of external driver launched by FLY, continuing the TP series naming, and is compatible with the DP series and PRO X10.
It is a 5V boost module that elevates the 3.3V driver signals (STEP/DIR/EN) output by the mainboard to 5V, making it suitable for external drivers that require 5V logic level input.
Basic Parameters
| Item | Description |
|---|---|
| Supported Mainboards | DP5, PRO X10, MMU |
| Main Function | Boosts driver signals from 3.3V to 5V, compatible with more external drivers |
| Power Supply Requirement | Requires 24V power from the mainboard; the mainboard driver power input must not exceed 24V |
This module requires 24V power from the mainboard, and the mainboard driver power input must not exceed 24V. Before connecting, please confirm the mainboard power specifications to avoid damaging the module.
Wiring Instructions
Before starting, completely power off the printer and disconnect the power supply. Do not plug or unplug cables, organize interface wiring, or touch terminals while power is on.
Reference Configuration
The TP 5V External Driver is a level conversion module and does not require configuration of driver sections such as [tmc5160] or [tmc2209] itself. The mainboard side should simply configure the STEP/DIR/EN pins as per the external driver setup.
External Driver Configuration Guide: External Driver Usage Tutorial
After installing this module, do not connect the external driver immediately. First, complete the safety check according to the 5V Module Test Instructions to confirm that the module and configuration are correct before proceeding with wiring.